Function features and advantages
1. This machine adopts electrical & electronic synchronous control technique, both separate-phases welding and welding time composed of digital and integrated electric circuit, more intelligent and rational, once pressing, and separate welding.
2. The line wire is fed from coils; the cross wire is pre-cut, fed from hopper driven by stepper motor.
3. Mesh pulling system adopts elastic tension link and opening positioning equipment, the opening is easy to regulate accurately and can be adjusted freely within a certain range.
4. The welding speed is fast and it is easy to learn and operate. Only two operators are enough.
5. The finished products can be in coil or in panel.
Main parameter
| Item |
WZ1200
(2.0-5.0mm) |
WZ1600
(3.0-5.0mm) |
WZ2100
(3.0-5.0mm) |
WZ2500
(3.0-5.0mm) |
| Number of Electrodes |
24 |
32 |
40 |
48 |
| Max Mesh Width |
1200mm |
1600mm |
2100mm |
2500mm |
| Wire Diameter |
2.0-5.0mm |
3.0-5.0mm |
3.0-5.0mm |
3.0-5.0mm |
| Cross Wire Space |
50-200mm |
50-200mm |
50-200mm |
50-200mm |
| Line Wire Space |
50-200mm |
50-200mm |
50-200mm |
50-200mm |
| Rated Power |
100KWA*4 |
100KWA*5 |
100KWA*6 |
100KWA*8 |
| Welding Speed |
40-60times/min |
40-60times/min |
40-60times/min |
40-60times/min |
| Control System |
PLC or SCM |
PLC or SCM |
PLC or SCM |
PLC or SCM |
Products & Application
This machine is used to manufacture construction mesh.
